92111-006 Screw Driver Lever
Zedrider came across a few interesting and rare parts over the last few years. Some are genuine factory items and others will replace discontinued original parts to keep you on the move. A few are here because they give you a massive saving on factory prices.
We have tried and tested most of the products and have included fitting tips and photos for you to see.
Postage costs are for single items. It can be combined If you want to buy multiples to save money.
We have tried and tested most of the products and have included fitting tips and photos for you to see.
Postage costs are for single items. It can be combined If you want to buy multiples to save money.
Z650 Silencers
** NEW NEW NEW **
A new reproduction of the Z650 silencer. Can also be used on Z1000 bikes.
You will need to cut the original mid pipe and join these to it.
Hide the joint behind the heat shields. These have multiple gas exit holes.
See them fitted here - https://www.youtube.com/watch?v=aTXkTW6YoiI
Only £139.99 a pair plus courier charges
A new reproduction of the Z650 silencer. Can also be used on Z1000 bikes.
You will need to cut the original mid pipe and join these to it.
Hide the joint behind the heat shields. These have multiple gas exit holes.
See them fitted here - https://www.youtube.com/watch?v=aTXkTW6YoiI
Only £139.99 a pair plus courier charges
ZRX Daily Safety Checks
Part code 56033-1113
A genuine factory decal for the ZRX 1100 & 1200 under seat area.
Shows all the Daily Safety Checks. French & English text.
Now rare & unavailable from dealers.
**hurry - limited stock**
Only £11.99 plus £1.29 UK postage
A genuine factory decal for the ZRX 1100 & 1200 under seat area.
Shows all the Daily Safety Checks. French & English text.
Now rare & unavailable from dealers.
**hurry - limited stock**
Only £11.99 plus £1.29 UK postage
ZRX Brake & Clutch Levers
Part code 13236-1221 & 1237
Now available - a new reproduction of the ZRX brake & clutch lever.
Complete with 4 click adjuster mechanism.
An easy repair or replacement at under half dealer price.
Buy two and get them for £27 the pair.
Only £15.99 each plus £1.99 UK postage
Now available - a new reproduction of the ZRX brake & clutch lever.
Complete with 4 click adjuster mechanism.
An easy repair or replacement at under half dealer price.
Buy two and get them for £27 the pair.
Only £15.99 each plus £1.99 UK postage
92050-076 Rear Sprocket Seal
This seal goes on the outer sprocket carrier - visible against the rear axle in the centre of the sprocket.
It has two jobs - keeping grease in the bearing plus stopping crud and road salt spray from attacking the bearings. Take a look at your seal - it will probably be cracked and worn by now and not giving a good seal any longer. This is the correct item to fit Z650 B1,2,3 from 1977-79 and F1 from 1980 also Z550 A1,2,3,4 from 1980-83
Only £4.49 plus £1.29 UK postage (parts bag & label not included)
It has two jobs - keeping grease in the bearing plus stopping crud and road salt spray from attacking the bearings. Take a look at your seal - it will probably be cracked and worn by now and not giving a good seal any longer. This is the correct item to fit Z650 B1,2,3 from 1977-79 and F1 from 1980 also Z550 A1,2,3,4 from 1980-83
Only £4.49 plus £1.29 UK postage (parts bag & label not included)
Z1-R Rear Brake Pad Shims
Part code 11009-1840
A new set of four copper exhaust gaskets for the ZRX 1200
Only £9.99 including free UK postage
A new set of four copper exhaust gaskets for the ZRX 1200
Only £9.99 including free UK postage
2 x 43048-008 Pistons + Seals
Part code 43048-008
Two new brake pistons with seals for the rear calliper.
Fits Z1-R D1, Z1000 A models and many Z650 bikes.
Size is 42.83mm diameter and 22.83mm tall
Measure size against your old one.
Please check the condition of your calliper bore before ordering
Only £59.98 plus £2.99 UK postage
Two new brake pistons with seals for the rear calliper.
Fits Z1-R D1, Z1000 A models and many Z650 bikes.
Size is 42.83mm diameter and 22.83mm tall
Measure size against your old one.
Please check the condition of your calliper bore before ordering
Only £59.98 plus £2.99 UK postage
42mm Caliper Piston & Seals
This is a brand new 42mm calliper piston which will fit Z900, 650 and 1000 models. You can see a typical original pitted piston on the left. It comes with a new piston seal and dust boot as shown in the picture.
Fits models with calliper in front or behind the forks. Size is 42.79mm diameter and 40.05mm tall which matches the original shown here.
Measure size against your old one.
Please check the condition of your calliper bore before ordering.
Only £24.99 plus £2.19 UK postage
Fits models with calliper in front or behind the forks. Size is 42.79mm diameter and 40.05mm tall which matches the original shown here.
Measure size against your old one.
Please check the condition of your calliper bore before ordering.
Only £24.99 plus £2.19 UK postage
43052-005 Caliper Shaft Boots (x4)
These four boots protect the floating mechanism which allows even braking between the fixed inner pad and the floating outer pad. Price is for a full caliper set (4 items).Genuine rrp is £17.84 per set
Fitted as new to calipers on the following classic Kawasakis - H1 D,E,F 1973-75 KH400 A3,4,5 1976 -78 KH500 A8 1976 Z900 A4,,5 B1 (Ltd) 1976-77 Z1000 A1,2,2A,3,3A,4 1977-80 Z1000 B1,2,3,4 1977-80 Z1000 C,D,E,G 1978-80 Z1300 A1,2,3,4 1979-80 Z650 B1,2,2A,3 C1,2,3 1977-79 D1,1A,2 (SR) 1978-80 Z750 B1,2,3,4 1976-79 G1 (Ltd) 1980
Only £10.99 plus £1.29 UK postage
Fitted as new to calipers on the following classic Kawasakis - H1 D,E,F 1973-75 KH400 A3,4,5 1976 -78 KH500 A8 1976 Z900 A4,,5 B1 (Ltd) 1976-77 Z1000 A1,2,2A,3,3A,4 1977-80 Z1000 B1,2,3,4 1977-80 Z1000 C,D,E,G 1978-80 Z1300 A1,2,3,4 1979-80 Z650 B1,2,2A,3 C1,2,3 1977-79 D1,1A,2 (SR) 1978-80 Z750 B1,2,3,4 1976-79 G1 (Ltd) 1980
Only £10.99 plus £1.29 UK postage
43053-006 Caliper Shaft O rings x 4
The four little O rings at the front of this picture are critical for effective braking on your bike. They get between the caliper shaft bolts and the caliper mount. This allows the correct floating movement to happen. Genuine rrp is £16.04 per set.
You will often find them missing or worn flat when you service the caliper.Place these into the recess at each side of the Caliper Mount (top right) Then Fit the dust boots as shown. Lube with silicon spray or a light oil. Do not use grease or it will clog up the sliding action.
Only £7.99 for 4 plus £1.29 UK postage
You will often find them missing or worn flat when you service the caliper.Place these into the recess at each side of the Caliper Mount (top right) Then Fit the dust boots as shown. Lube with silicon spray or a light oil. Do not use grease or it will clog up the sliding action.
Only £7.99 for 4 plus £1.29 UK postage
4 O rings & 4 dust boots - Caliper set
Whilst your caliper shaft bolts are out you may prefer to replace all the O rings and Dust Boots with new parts as they do wear down and degrade with age and contamination from the elements. The only way your fixed inner pad can move properly to give even braking is when these are in good condition.
Get both the items above in one go and enjoy a massive saving of over 50% on the genuine rrp of £32.59 a set.
This could really add up if you have a double disc fitted.
Only £16.99 for 4 plus £1.29 UK postage
Get both the items above in one go and enjoy a massive saving of over 50% on the genuine rrp of £32.59 a set.
This could really add up if you have a double disc fitted.
Only £16.99 for 4 plus £1.29 UK postage
Bleed Nipple & Cover 43085-001
If your cover is cracked or missing this new one will stretch over the nipple (without removing it). A perfect match for the genuine one (on right).
If your nipple has poor threads or corrosion it can damage that expensive caliper when you tighten it back up after a service or fluid change.
The factory sets (on right) have an rrp of £12.04. You can see our replacements fitted to the caliper on the left and seperately. Nipples have correct m7 x 1mm threads and are more shiny than originals - but this is not seen once the cap is fitted. Save over 50% now.
Only £5.99 plus £1.29 UK postage
If your nipple has poor threads or corrosion it can damage that expensive caliper when you tighten it back up after a service or fluid change.
The factory sets (on right) have an rrp of £12.04. You can see our replacements fitted to the caliper on the left and seperately. Nipples have correct m7 x 1mm threads and are more shiny than originals - but this is not seen once the cap is fitted. Save over 50% now.
Only £5.99 plus £1.29 UK postage
Z1, Z1A & Z1B Kit
New Z1 Carb Repair Kit contains all the gaskets, jets,needle & float valve etc. you need to restore one carburettor. Made in Japan. This kit will fit all three Z1 models from 1972 to 1975 because it contains both sizes of pilot jet and both types of carb bowl gasket.
You need a set of four kits to do one bike like this - http://i816.photobucket.com/albums/zz82/pertonpc/Items%20for%20Sale/Z1Set.jpg
Only £61.99 for a full set of four kits plus £1.99 UK postage
You need a set of four kits to do one bike like this - http://i816.photobucket.com/albums/zz82/pertonpc/Items%20for%20Sale/Z1Set.jpg
Only £61.99 for a full set of four kits plus £1.99 UK postage
Z650 & 900 Kit
New Z650, Z1000 and Z900 Carb Repair Kit contains all the gaskets, float valve and O rings to restore one carbuettor. Made in Japan. Jets and Needle are not included.
You need a set of four kits to do one bike like this -
http://i816.photobucket.com/albums/zz82/pertonpc/Items%20for%20Sale/650900Set.jpg
Only £59.99 for a full set of four kits plus £1.99 UK postage
You need a set of four kits to do one bike like this -
http://i816.photobucket.com/albums/zz82/pertonpc/Items%20for%20Sale/650900Set.jpg
Only £59.99 for a full set of four kits plus £1.99 UK postage
HELMET HOOK Warning Decals
These have been professionally reproduced on white vinyl with black print.
Size is approx. 14 x 28 mm each decal.
Supplied on backing paper ready to peel, not laminated, so apply laquer, clear tape or paint protection film if you will be using polish or T Cut etc. once fitted.
Used on many early Kawasakis, often on both sides of the tail piece or on Z650 the forward one goes on the battery box.
Only £3.29 a pair plus 99p UK postage
Size is approx. 14 x 28 mm each decal.
Supplied on backing paper ready to peel, not laminated, so apply laquer, clear tape or paint protection film if you will be using polish or T Cut etc. once fitted.
Used on many early Kawasakis, often on both sides of the tail piece or on Z650 the forward one goes on the battery box.
Only £3.29 a pair plus 99p UK postage
Z1 KEY HOLDER Decal
These have been professionally reproduced with white letters on a black background.
Size is approx.10 x 21 mm each decal
Supplied on backing paper ready to peel, not laminated.
Used on the Z1 range to go on top of the warning light housing above the key holder hole. Often missing and not included in after market decal packs.
Only £3.49 each plus 99p UK postage
HT Lead Number Decals
These have been professionally reproduced with white numbers on a black background.
Supplied on backing paper ready to peel, not laminated.
Take care to fit near the plug cap where air can circulate and avoid direct contact with hot engine parts.
Used at the factory to prevent mishaps during maintenance.
Standard fit on the HT leads of most early Zed and KH machines plus later bikes such as the Zephyr range.
Often missing and not included in after market decal packs.
Only £3.99 per set of four plus 99p UK postage
5 Pack assorted 10 & 20 amp fuses
Check your fuses now! They should be 25mm long - not the 30mm ones that some use by mistake. On Z650, 900, 1000 etc. you will probably need a 20amp main and two 10 amp lights fuses. Plus one spare of each in the lid holder.
On a Z1 you just need a 20 amp main fuse and a spare should live in the slot in the fuse holder damper rubber. Get any five assorted 10 & 20 amp fuses (you choose) here and save over 50% on dealer items at £2.10 (10A) & £2.51 (20A)
Only 5.29 including UK postage
On a Z1 you just need a 20 amp main fuse and a spare should live in the slot in the fuse holder damper rubber. Get any five assorted 10 & 20 amp fuses (you choose) here and save over 50% on dealer items at £2.10 (10A) & £2.51 (20A)
Only 5.29 including UK postage
70's Chrome Tyre Valve Tool & Cap
Give a nice original 1970's finish to your wheels with a pair of these chromed tyre valve caps.
As fitted at the factory to set off your chrome wheel rims and shiny zinced spokes these were widely used in the 1960's and 70's but have not been supplied with new valves and inner tubes for many years now.
Complete with correct inner rubber valve seal.
The devil is in the detail with bike restoration - and these will provide an authentic talking point - as well as a handy tyre valve tool should you ever need one.
Only £2.49 plus £1.29 UK postage.
As fitted at the factory to set off your chrome wheel rims and shiny zinced spokes these were widely used in the 1960's and 70's but have not been supplied with new valves and inner tubes for many years now.
Complete with correct inner rubber valve seal.
The devil is in the detail with bike restoration - and these will provide an authentic talking point - as well as a handy tyre valve tool should you ever need one.
Only £2.49 plus £1.29 UK postage.
Standard Black Valve Caps
The only other original type of valve cap used on 1970's motorcycles. May suit you better if you are running alloy wheels or to keep as a spare set when you don't want someone helping themselves to the vintage chrome ones above.
Price is for one pair of new matching caps
Only 49p plus £1.29 UK postage
Price is for one pair of new matching caps
Only 49p plus £1.29 UK postage
Steering Head Bearings
New full set of replacement steering head bearings for Kawasaki - or any other machine that uses 1/4inch bearings.Check your manual in the Frame and Forks section to see how many and what size your bike uses.
Early zed bikes like Z650 & Z1 need 39 - 20 lower and 19 upper, H1 and H2 only need 38.Ask here if you have a different machine.
YOU GET 42 - ALL MOTORCYCLE PARTS QUALITY. Good to keep or return your bike to standard.
Only £3.99 plus £0.99 UK postage
Early zed bikes like Z650 & Z1 need 39 - 20 lower and 19 upper, H1 and H2 only need 38.Ask here if you have a different machine.
YOU GET 42 - ALL MOTORCYCLE PARTS QUALITY. Good to keep or return your bike to standard.
Only £3.99 plus £0.99 UK postage
Z1 Petrol Cap 51048-007
Fine reproduction of the keyless Kawasaki petrol cap assembly Part code 51048-007. Fitted as new to these models:
Z1,A,B 1972-75, H1 D,E,F 1973-75, H2,B,C 1972-74, KH250 A5 1976, KH500 A8 1976, Z400 1975, S1,A,B,C 1973-75 S3A 1975
Models from 1976 onwards had locking caps - also available if you contact us.
Comes complete with the cap fitting pin, gasket and the complete catch mechanism (catch, spring and fitting pin)
Only £24.99 plus £3.39 UK postage
Z1,A,B 1972-75, H1 D,E,F 1973-75, H2,B,C 1972-74, KH250 A5 1976, KH500 A8 1976, Z400 1975, S1,A,B,C 1973-75 S3A 1975
Models from 1976 onwards had locking caps - also available if you contact us.
Comes complete with the cap fitting pin, gasket and the complete catch mechanism (catch, spring and fitting pin)
Only £24.99 plus £3.39 UK postage
